Pools are situated at the heart of your swimming pool and they act as the main circulation to your system. When you pull water into your pool through the skimmer and then push it through the filter, the automatic sanitation system, or chlorinator or automatic sanitation system before the pump, then it deposits water to your pool through main returns.

Since the pool pump has main components, the pool pump will include an impeller, motor, and basket. Since it is very important, protecting the pool pump and maintaining its good shape is important to keep your pool healthy.

Pool contractors will tell you what you can do to avoid damaging the pump, you also need these tips:

Keep the Water Circulating

This is mainly done to keep the water from freezing. Keep in mind that frozen water expands it by 9%, which means that it will expand wherever you put it.

Therefore, when water freezes in the pool pump, it can crack the housing, damage internal components, and break the motor.

That is why your pool pump should be kept running when the temperature is cold. Since flowing water will not freeze, this will prevent the water in your pump from causing damage and freezing. It will also prevent your pipes from bursting.

You can also remove the drain plugs and clear the lines if you cannot run the pump.

It Should be Kept Cool

When the pool pump is kept cool, it increases longevity and helps you avoid malfunctions when you go down the track. In order to provide the pump with the right air circulation, you need to place the pump away from mulch, plants, and enclosed spaces as well. While a pool pump always feels hot to touch when you run it, you should avoid putting the pump under direct sunlight to minimize overheating.

There are many shelters designed to box away pool pumps to make the appearance tidier and provide protection from different elements without sacrificing airflow.

The Basket Should be Kept Clean

Keeping the pool basket clean and free of debris is important. The build-up in the basket impedes the water flow through the pump and it can potentially get caught up in the impeller. This could lead to permanent and expensive pump damage.

Maintain the Water Level

In order for the pump to continue functioning, a specific water level should be maintained. A water level that is too low causes your pool pump to draw in air which increases the possibility of equipment damage. The majority of water levels should not fall 18 inches because it will go below the tile line, but it is always incredible to ask the pool professional about a particular situation.

Trim the Plants and Weeds Around the Pool Pump

Pumps require unrestricted airflow so they can work properly. The overhanging weeds, bushes, and debris can limit airflow, which overheats and it can even clog up your pump.

Seal Leaks and Gaps

Airflow occurs in a lot of different locations but some common ones are the pump drain plugs, pump lid seal, filter bands, or valves. You can try some pool lube on your pump lid seal and pump drain plugs, and check if that is helpful.

Any leak on the side of the pool could cause air bubbles to form, which causes the motor to get overworked.

Check if there are any leaks and once you find where the leak is coming from, you should replace the faulty part or seal it using a silicone-based sealant.

You can talk to stone patio contractor Long Island if you need a pump replacement.